New Janome General-Leaderboard Left

Facebook Twitter Sew4Home RSS Feed Follow Me on Pinterest Instagram

Sew4Home

Sparkling Holiday Table Runner with Four Corner Tassels

Printer-friendly versionPDF version


Although I have no proof, I feel certain that somewhere in my past there is an ancestor of regal bearing. Perhaps a Baltic princess or a brooding prince from the moors of Scotland. I have a deep affection for well-appointed luxury. For a formal occasion, I love the look of a table runner with place mats. The rich dark wood of the dining table sets off the fabric, and the individual linens act like beautiful little frames for the china and silver. This very elegant table runner in a sparkling platinum damask with rich mahogany accents is certainly fit for a king or a queen or... for your own royal family this holiday season.

We originally used the Antiquities collection by Michael Miller Fabrics, which featured sparkling metallic accents. This is an older collection that is no longer available, but quilting cottons with metallic accents continue as a popular top trend. Below are two favorite combos we spotted at Fabric.com. Click on a swatch for more detail.

        

If you'd like to make our entrie table top, check out the Project Index for numerous suggestions. Or link directly to the placemats and bound napkins shown in our photos. 


The runner finishes at approximately 86½" x 15".

Sewing Tools You Need

Fabric and Other Supplies

Click to Enlarge

  • 1-2½ yards of 44-45" wide quilting weight metallic cotton for runner's center panel
    NOTE: We did not want a seam in the top of our runner, so we started with a full 2½ yards of fabric to allow us to cut a continuous panel. This left us with nice chunk of leftover fabric. You could make matching placemats or even another whole table runner! Just imagine it... your best friend comes over for the holidays and says, "What a gorgeous table runner." You say, "Why thank you, I've made a matching one just for you." She replies, "You are the more incredible person in the whole wide world!" Violins swell in the background. Everyone hugs. The end. Or, you could add a seam, and then you'd only need 1 yard.
  • ¾ yard of 44-45" coordinating quilting weight metallic cotton for runner's accent panels and binding
  • 1-2½ yards of 44-45" solid color quilting weight fabric for runner's backing
    NOTE: As above, you can cut as a single panel using the larger amount of fabric or add a seam and cut two WOFs strips from the smaller yardage.
  • ½ yard of 90" wide low-loft batting
  • FOUR 3" - 4" tassels: we purchased rayon tassels in deep brown - a link is given below to our tassel tutorial should you want to make your own rather than buy
  • All purpose thread to match fabric
  • Embroidery thread for accent stitching: we used rayon embroidery thread in taupe; the shiny finish of the rayon thread compliments the metallic in the fabric
  • See-through ruler: a 6" wide ruler would be best
  • Scissors or rotary cutter and mat
  • Iron and ironing board
  • Fabric marker, pen or chalk
  • Hand sewing needle and thread for basting
  • Seam gauge
  • Seam ripper
  • Straight pins

Getting Started

  1. From the runner's center fabric, cut a 15" wide panel the length of the fabric (90"). If your fabric has a dramatic motif as ours did, make sure it is perfectly centered. If you are using a single yard, cut TWO 15" x width of fabric (WOF) panels and seam them together to create a finished full length panel. 
    Click to Enlarge
  2. From this 15" x 90" panel, cut TWO 3½"x 15" strips for the ends and ONE 71½" x 15" center panel.
    NOTE: If you've seamed two WOF panels, cut the smaller strips from each end then trim the main panel from each end as well in order to keep your seam centered. 
    Click to Enlarge
  3. From the accent fabric, fussy cut TWO 6" x 15" panels. If you have a 6" wide see-through ruler, use it to help center the pattern for each panel.
    Click to Enlarge
  4. Also from the accent fabric, fussy cut SEVEN 3" x WOF strips, again being careful to center the design motif.
  5. From the backing fabric, cut ONE 15" x 86½" panel. Or, as above, cut two 15" panels and seam to create the finished length.
  6. From the batting, cut ONE 15" x 86½" panel.

At Your Sewing Machine & Ironing Board

Create the binding strips

  1. Join the 3" x WOF accent strips together to one long strip. To join the strips, trim the ends at a 45° angle. Pin together, aligning the angled ends.
    Click to Enlarge
  2. Sew together all the "joints" with a ¼" seam allowance. Press open the seam allowances. Trim the full strip down into TWO 90" lengths and TWO 16" lengths
    NOTE: If your fabric has a strong pattern as ours did, fussy cut ¼" from a distinct line within the motif on each strip, then line up these two "lines" at each seam. This technique will effectively hide all the joints along your binding strips.
  3. Fold in one long edge on all four strips ¾" and press.
    Click to Enlarge

Assemble the runner layers

  1. Pin one 6" x 15" accent panel, rights sides together, with each end of the 71½" x 15" center panel.
  2. Sew both panels in place, using a ½" seam allowance.
  3. Pin one 3½"x 15" main fabric strip, rights sides together, with each end's accent panel.
  4. Sew both outer strips in place, using a ½" seam allowance.
  5. Press all the seam allowances toward the accent fabric.
  6. Re-thread your machine with topstitching thread in the top and bobbin. We used rayon embroidery thread in a taupe color to add some shine to the stitching. Slightly lengthen the stitch.
  7. Topstitch along both seams within the accent panel, keeping your stitch lines close to the panel's edge.
  8. Place the backing fabric flat on your work surface, wrong side up.
  9. Place the batting over the backing fabric, aligning all the raw edges.
  10. Place the assembled runner top over the batting, right side up, matching all the edges. Pin in place through all three layers around the entire perimeter.
    Click to Enlarge

Bind the edges and attach the tassels

  1. Re-thread your machine with regular sewing thread in the top and bobbin.
  2. Find the two 90" lengths of binding. Center the binding and pin it, right sides together and with raw edges aligned, to each long side of the table runner. The binding will extend at each end beyond the table runner. This is correct.
    Click to Enlarge
  3. Using a ¾" seam allowance, stitch each length of binding in place.
  4. Press the binding away from the runner. Then, wrap the binding over to the wrong side of the runner, covering the raw edges. The pre-folded edge of the binding should cover the line of stitching on the back and extend beyond it just slightly. Hand baste this folded edge in place. In our photos below, you can see the bright blue thread we used for our basting stitches showing through on the right side of the runner.
  5. Re-thread your machine with topstitching thread in both the top and bobbin.
  6. Working on the RIGHT side of the runner, edgestitch the binding, starying about ⅛" from the binding seam, which will then catch and secure the back of the binding.
  7. Trim the ends of the binding flush with the ends of the table runner.
  8. Place a tassel at each corner of the table runner, with the loop facing the raw edge of the runner and the tassel facing the body of the runner. Center the tassel on the binding, and pin in place.
    Click to Enlarge
    NOTE: If you are using a store-bought tassel, leave on the cellophane wrapper until all construction is complete. This keeps the silky threads out of the way.
  9. Re-thread your machine with regular sewing thread in the top and bobbin.
  10. Find the two 16" lengths of binding. Center the binding and pin one length, right sides together and with raw edges aligned, to each end of the table runner. The binding will extend at each side beyond the table runner. The ends of the tassels are sandwiched between the layers.
    Click to Enlarge
  11. Using a ¾" seam allowance, stitch each length of binding in place, catching the tassel loops in the seams.
  12. Press the binding away from the table runner.
  13. With the binding strip laying flat, away from the runner, fold the tassel down over the top of the binding and tack it in place by sewing back and forth across the loop ¾" away from the seam. Repeat to secure all four tassels in the same manner.
    Click to Enlarge
  14. Fold the binding strip in half (you're kind of folding it back on itself), right sides together, and stitch across the short ends, using a ½" seam allowance, which should be flush with the finished edge of the table runner. Adjust the seam allowance as needed to insure it is flush with the finished edge. Trim the seam allowance close to the stitching.
    Click to Enlarge
  15. Turn the binding ends right side out and wrap the binding over to the wrong side of the runner, covering the raw edges.
  16. As above with the long sides of the runner, the pre-folded edge of the binding should cover the line of stitching on the back and extend beyond it just slightly. Hand baste this folded edge in place.
  17. Re-thread your machine with the topstitching thread in both the top and bobbin.
  18. Again as above, working on the right side of the runner, edgestitch along the binding from side to side, catching the tassels again to better secure them in place.
    Click to Enlarge
    Click to Enlarge
  19. Remove all basting threads from the completed table runner.

Hints and Tips

  1. We were able to find tassels that matched our fabric, but that's not always the case. To make your own, take a look at our tutorial: How to Make a Tassel.
  2. The steps above are quite detailed, but if you are new to binding, you might also want to read our full tutorial on binding.

Contributors
Project Design: Alicia Thommas  
Sample Creation and Instructional Outline: Michele Mishler

Section: 

Comments (2)

Terri J said:
Terri J's picture

Wow, you do such a great job showing and explaining how to make this table runner!  Thank you for all you do!  I appreciate you very much!!!

Liz Johnson.Editor.Sew4Home said:
Liz Johnson.Editor.Sew4Home's picture

@Terri J - Thank you so much for such a sweet message. We're super happy to hear we've made this table runner so easy for you to understand. Let us know if you give it a go. We'd love to see pictures.