• Facebook
  • Instagram
  • Pinterest
  • Email
  • Print
Print Friendly, PDF & Email
  • PDF
  • Facebook
  • Instagram
  • Pinterest
  • Email
  • Print

The cloth napkin; you simply can’t ask for an easier home décor project. If you are just getting started in sewing or teaching someone new, napkins are an instant-gratification winner. If you’re already a pro, they’re a fast and fun project. And this time of year, when the holidays are almost upon us, they’re a perfect host/hostess gift to whip out in an afternoon before your evening festivities. We kick ours up a notch with beautiful decorative stitching all around the edge and a coordinating fabric napkin ring that “ties” them altogether.

We chose a decorative stitch from the dozens and dozens of built-in options on our Janome studio machines, enlarging it to a full 9mm in width. Nearly every sewing machine, even the basic ones, have at least a few decorative stitches built in. This is a great project to try out some of those bits of tiny thread art. Take a look at our tutorial on How to Turn a Corner with a Decorative Stitch for handy tips and techniques to get a lovely 90˚ angle.

Our napkins feature the same fabric on the front and back. The colors and motifs were already so rich and vibrant, we felt our table settings would be sufficiently exquisite simply by varying prints napkin to napkin. However, using different fabrics for the front and back is another option. In that case, we’d recommend just two fabrics: one for all the fronts, and one for all the backs. You do still want your dinner guests to be able to concentrate on their food.

Our four-napkin set pairs traditional florals with contemporary graphic motifs. All of these pretty prints originally came from Joel Dewberry’s Heirloom collection for FreeSpirit Fabrics. This is an older collection that is no longer readily available, however, we recommend simply browsing through your scrap stash for some favorite 21″ x 21″ options, then mixing and matching to your heart’s content.

Sewing Tools You Need

Fabric and Other Supplies

NOTES: Our napkins finish at 20″ x 20″ and are double-sided. This means you need at least two 21″ x 21″ squares of fabric to make one napkin. If you’re working with 44-45″ wide fabric, as most quilting cottons are, this means you need at least 21″ in length. If you get ⅔ of a yard, that is 24″ – plenty of length, and at 44-45″, plenty of width. In fact, you will have just enough left to make the napkin ties from your scraps.

If your fabric has a particularly large motif, you may want to get a full yard to allow enough flexibility for a pretty fussy cut.

Click to Enlarge
NOTE: The supplies shown below are for ONE napkin and ONE tie.

  • ⅔ – 1 yard of 44″+ wide quilting weight cotton (see notes just above on sizing)
  • Scrap (apx 9″ x 4″) of fabric for the napkin tie; we used one fabric for all our ties to bring the mix-and-match napkins into a coordinated set
  • Optional: scrap of lightweight fusible interfacing for the napkin tie – one piece 2″ x 7″.
    INTERFACING NOTE: With quality designer quilting cotton, we felt our ties were stable enough using just two layers of fabric and so did not add interfacing. If the fabric you choose is quite lightweight, we suggest adding interfacing. For the same reason, we did not stabilize the edge of our napkins prior to the decorative stitching. Instead, we relied on the two layers of the fabric plus the seam allowances to provide stability, which worked just great. Practice on scraps with and without stabilization to make sure your stitching works as you hope it will.
  • ONE 1″ – 1½” button; we used a 1″ wooden button
  • ½ yard of thin ribbon, cording or suede for the tie; we used a deep red suede
  • All purpose thread in colors to match fabric
  • Contrasting all purpose thread for decorative stitching
  • See-through ruler
  • Fabric pencil
  • Iron and ironing board
  • Scissors or rotary cutter and mat
  • Straight pins
  • Seam gauge
  • Seam ripper

Getting Started

  1. From each fabric for your napkins, fussy cut TWO 21″ x 21″ squares.
  2. From each fabric for the ties, fussy cut TWO 8″ x 3″ strips.
    NOTE: We recommend a rotary cutter for cutting squares. It’s faster and more accurate.

At Your Sewing Machine & Ironing Board


  1. Place the napkin front and back squares right sides together. Pin around all four sides, leaving a 3″ – 4″ opening in the middle of one side for turning.
    Click to Enlarge
  2. Using a ½” seam allowance, stitch around all four sides, locking the seam at either side of the 3″ – 4″ opening. Remember to stop at each corner, with your needle in the down position, and pivot to create a sharp 90˚ angle.
  3. Clip the corners at a diagonal; be careful not to clip into your stitching.
  4. Turn the napkin right side out. Using a long, blunt-end tool, such as a large knitting needle, chopstick or point turner, gently push out each corner so it is nice and sharp.
  5. Press well, turning in the raw edges of the opening so they are flush with the sewn seam. Pin the opening closed.
    Click to Enlarge
  6. Re-thread your machine with contrasting thread in the top and bobbin.
  7. Following the instruction manual, set up your machine for decorative stitching. Choose a decorative stitch that will stand out nicely against your fabric. Practice on scraps to get your best stitch length and width.
    NOTE: If you are new to decorative stitching, check out our article with general tips and techniques as well as our tutorial on turning corners with a decorative stitch.
  8. Stitch around all four sides of the napkin, using the decorative stitch. How far away from the edge you are will depend on the width of your stitch and your personal preference. We used a 9mm wide stitch and so positioned the center of the stitch ⅜” in from the edge of the napkin. This not only looked best, it allowed us to simply use the outside edge of the presser foot as a guide for keeping the stitch straight.
    Click to Enlarge
  9. Go slowly, and carefully watch your foot. It took us about 20 minutes, or 5 minutes per side, to do our stitching.
    Click to Enlarge
  10. The NUMBER ONE, most important tip: test, test and test again!! Better to use up a little extra thread and a few scraps than to ruin a napkin. Decorative stitches are no fun to try to take out with a seam ripper.
    Click to Enlarge

Napkin Ties

  1. Place two 8″ x 3″ strips right sides together. Pin, leaving a 1″ – 2″ opening for turning.
  2. Using a ½” seam allowance, stitch around all four sides, locking the seam at either side of the 1″ – 2″ opening. Remember to stop at each corner, with your needle in the down position, and pivot.
    Click to Enlarge
  3. Clip the corners at a diagonalTrim back the seam allowance to ¼”, except at the opening; leave the full ½” allowance there.
    Click to Enlarge
  4. Turn the tie right side out. As above, use a long, blunt-end tool, such as a large knitting needle, chopstick or point turner, to gently push out each corner so it is nice and sharp.
  5. Press well, turning in the raw edges of the opening so they are flush with the sewn seam. Pin the opening closed.
  6. Increase the stitch length and topstitch ¼” in from the edge around all four sides, remembering again to pivot at each corner. This topstitching will close the opening used for turning. We used our Janome Quarter Inch Seam foot to keep the topstitching precise. Press again.
    Click to Enlarge
  7. Sew a button in the exact center of the tie. Be careful with your stitching so you create a pretty “X” stitch from the front on the button and neat little “X” on the back of the fabric. You will see the stitching from both sides. If you are new to this, check out our tutorial on How to Sew on a Button.
  8. Wrap your ribbon, cording or suede around the button and tie a secure knot.
    Click to Enlarge
  9. Trim the short end so it disappears under the button. Test wrap a napkin to determine if your long end needs to be trimmed. We cut ours to a finished length of about 15″.
    NOTE: Tying the cord around the button will “crimp'”the fabric a bit. Stretch the fabric back out all the around the button to flatten, then press well (using a pressing cloth to protect the button) from the back (right over the button) and from the front (all around the button).


Project Design: Alicia Thommas
Sample Creation: Liz Johnson

Notify of

*Sew4Home reserves the right to restrict comments that don’t relate to the article, contain profanity, personal attacks or promote personal or other business. When commenting, your name will display but your email will not.

1 Comment
Oldest Most Voted
Inline Feedbacks
View all comments
5 years ago



Translate »

You cannot copy content of this page



Enter your email address below to subscribe to the Sew4Home newsletter. Be the first to see new projects and patterns, helpful techniques, and new resources to enhance your sewing experience.


We will never sell, rent or trade your personal information to third parties.