“Tick Tock, Cap’n… Tick, Tock… someone is coming!” I don’t know about you, but I spent a good chunk of my childhood hoping, wishing, dreaming I could fly like Peter Pan. I never actually jumped off the roof of the garden shed, but… I climbed up there and thought about it! Today, our Pillow Personality is: Playful. We’ve created a wonderfully sneaky crocodile, our homage to the creepy croc in Peter Pan who was forever stalking Captain Hook. Minky Dot and low nap fleece are the perfect pair for the top and bottom of Mr. Croc. Two widths of rick rack form his teeth and spine. And, we chose Fairfield’s luxuriously silky Poly-Fil® Supreme Fiberfill as our stuffing. The texture is wonderful for toys, plus it’s washable and non-allergenic. Although he looks complex, our crocodile takes just a little while. And, the pattern is a free download! “I was never to see Peter Pan again. Now I tell his story to my children and they will tell it to their children, and so it will go on – for all children grow up… Except one.”

Sewing Tools You Need

Fabric and Other Supplies

  • ½ yard of 60″ Minky Dot fleece for the top of the croc (body and feet); we used an olive green Minky Dot available at Fabric.com  
  • ½ yard of 60″ solid fleece for the bottom of the croc (body and feet); we used a yellow green solid available at Fabric.com
  • One 8 – 12oz bag of Poly-Fil® 100% Polyester Supreme Fiberfill; we used one complete 8oz bag to get the stuffing firmness we wanted; if you want a firmer crocodile, use a 12oz bag
  • 1 yard of extra -large rick rack in white for teeth
  • ½ yard of jumbo rick rack in green for the spine
    NOTE: Rick rack is measured in different ways by different manufacturers. We used by-the-yard projects as opposed to packaged rick rack. For the the teeth, you need a rick rack that is ½” in the width of the trim itself, which means the total height of the “wave” is a full 1″. This way, when you stitch down the center of the ric rac with a 1/2″ seam, the bottom of the wave will be revealed to form the teeth. For the spine, you need an even wider trim: 1″ in trim width for 2″ in total wave height.  
  • Two ⅜ – ½” black buttons for eyes; we used ½” black buttons in a shiny black – we even found some that had an inner circle that looked like an iris. We found some buttons at Fabric.com that would work just great.
  • Small scrap of heavy white felt for the eyes, a 4″ x 4″ square would be plenty
  • All purpose thread to match fabrics
  • All purpose thread in white to stitch eyes
  • All purpose thread in black to stitch nose
  • See-through ruler
  • Fabric pencil
  • Iron and ironing board
  • Scissors or rotary cutter and mat
  • Seam gauge
  • Seam ripper
  • Straight pins
  • Hand sewing needle

Getting Started

  1. Download and print out our five pattern sheets: Croc Head Part 1, Croc Head Part 2, Croc Body Part 1, Croc Body Part 2, Croc Feet.
    IMPORTANT: You must print these PDF files at 100%. DO NOT SCALE to fit the page.
  2. Cut out all the pattern pieces along the solid lines. Tape together the Head pattern pieces and the Body pattern pieces as indicated by the arrows on the printouts. Butt the pieces together; do not overlap.  
  3. Fold the Minky Dot in half lengthwise. 
  4. Place the pattern pieces on the Minky Dot as shown below, following the indications on the patterns themselves, and pin in place. 
  5. Cut out the all the pieces from the Minky Dot. 
    NOTE: Don’t worry about the solid fleece pieces yet. You will be cutting those later, using your completed Dot pieces as your patterns. 
  6. Cut out the eye from the Croc Head pattern piece. Using this as a mini pattern, cut two eyes from the white felt. 

At Your Sewing Machine & Ironing Board

The crocodile head

  1. Place the white rick rack around the the entire curved outer edge of the Minky Dot head. There is no rick rick along the straight back edge. 
  2. Pin in place all around. Machine baste in place, being extremely careful to keep your stitching at an exact ½” seam allowance. You want a full “wave” of the rick rack to show from the seam to create the croc’s teeth. You don’t want him to look like he needs braces. 
  3. Using the empty eye socket as a guide (remember… you cut out the eye for a pattern), mark the position of the eyes and pin the white felt ovals in place.
  4. Hand stitch the felt ovals in place with tiny, careful stitches. 
  5. Using the head pattern piece as a guide again, mark the position of the nostrils and use a fabric pen or pencil to draw guide lines. 
  6. Set up your machine for a dense satin stitch and stitch along the guide lines. 
  7. For extra support, and to help keep your stitches smooth, you can place a small strip of felt behind each nostril prior to stitching. 
  8. Here’s a look at the head with all the elements in place.

The crocodile body

  1. Place the jumbo rick rack un-evenly along the back seam of one body piece. It should be placed so it is just visible at each end with the maximum showing in the middle. This allows it to curve up, out and back down again from the finished seam… just like a real spine.
  2. We taped a length of thread in place in our photo below so you could see how the rick rack curved below and then above the center line of the seam
  3. Pin in place and then machine baste the rick rack spine in place, as you did above with the rick rack teeth.
  4. Place the two back pieces right sides together, sandwiching the rick rack between the layers. Pin in place. Check the rick rack from the right side prior to stitching to be triple-sure you have the curve correct.
  5. Using a ½” seam allowance, stitch along the spine (the photo above shows the stitched seam as well as the rick rack position).

Attach the head to the body and cut the solid fleece

  1. Place the finished head and body pieces right sides together, aligning them along the crocodile’s “neck.” Pin in place.
  2. Stitch in place with a ½” seam allowance.
  3. Place the finished crocodile top on the solid fleece, using it as a pattern to cut out the solid fleece (the crocodile belly) as one piece.
  4. Use the Minky Dot feet tops to cut four feet bottoms from the solid fleece.

Create and attach the feet

  1. Place one Minky Dot foot right sides together with one Solid Fleece foot. Repeat to assemble four pairs.
  2. Stitch the pairs together, following the curves with a ¼” seam allowance.
  3. Stitch all the way around leaving the straight end (the top of the foot) open for turning.
  4. Clip the inner curves, ie. the Vs of the toes.
  5. Turn right side out.
  6. Stitch a short seam, approximately ¾ – 1″ from the end of the foot up, to create three toes. 
  7. Stuff lightly with Poly-Fil®, using a chopstick (or similar stuffing tool) to help you get the stuffing into the toes. Below you see the three steps that allow the croc’s feet to take shape.
  8. Using the marks on the original pattern piece as your guide, pin the four feet to the solid fleece belly. The solid fleece bottoms of the feet should be against the solid fleece of the belly. The feet should be slightly angled: the front feet angling towards the head, the back feet angling in the opposite direction toward the tail. 
  9. Machine baste each foot in place, staying approximately ¼” from the raw edge within the standard seam allowance.

Assemble top to bottom, stuff and add eyes

  1. Place the croc top and the croc bottom right sides together aligning all the raw edges all the way around. Pin in place, leaving an approximate 5″ opening for turning and stuffing along one side. 
  2. Using a ½” seam allowance, stitch all the way around. Go slowly so you can keep your seam allowance nice and straight as you follow the crocodile’s curves. Remember to lock your seam at either side of the 5″ opening.
  3. Turn the crocodile right side out through the opening. Gently tug on the rick rack to make sure all his teeth and his spine are in place and even.
  4. Stuff with Poly-Fil® Supreme Fiberfill so he is soft and squeezable, but still stays sleek and steathly, like a good crocodile should. He shouldn’t be rock hard. As we mentioned above in our supply list, we used one full 8oz bag of Poly-Fil®.

    NOTE: For a super smooth and professional finish, check out our recent tutorial: Stuffing Tips & Tricks.
  5. Fold in the raw edges of the opening so they are flush with the sewn seam. Slip stitch the opening closed, using tiny stitches.
  6. Hand stitch the button eyes in place. Check the pattern piece for placement. The eyes should be centered at the top back of each felt oval. This position gives the crocodile his particularly “sneaky” look!

Contributors

Project Design: Alicia Thommas
Sample Creation and Instructional Outline: Kathy Andrews, What Sew Ever

Let YOUR Pillow’s Personality Shine – Enter The Contest Today!

CONTEST EXTENDED THROUGH WEDNESDAY, SEPTEMBER 12, 2012!

Use a Fairfield insert or filler to make a pillow with pizzazz!

Take a digital picture of your creation, and write up a short description (50 words or less) about your pillow’s personality and whether the pillow was made to be passed along or kept. You must be older than 18 and a legal citizen of the USA to enter.

Email the digital picture and its description to: S4H@fairfieldworld.com.

Each day, Fairfield will post a random number of pillow pictures on their Facebook wall, as well as onto a special board on their Pinterest page. The twenty photos that generate the most activity at these social media outlets will be the semi-finalists.

From these top twenty semi-finalists, an industry panel of judges will select the five major winners to receive:

Grand Prize: Home Elegance Pillow Assortment – Retail Value $178

First Prize: Home Elegance/Soft Touch Assortment – Retail Value $106

Second Prize: Soft Touch 6-Piece Pillow Bundle – Retail Value $76 

Third Prize: Soft Touch 4-Piece Pillow Bundle – Retail Value $54

Runner Up Prize: Soft Touch 2-Piece Pillow Bundle – Retail Value $22

Remaining 15 semi-finalists with each receive a 12oz bag of Poly-Fil Supreme® Fiberfil

The top five pillows will be featured in an article on Sew4Home.com.   

Remember, the entry deadline is September 07, 2012. CONTEST EXTENDED THROUGH WEDNESDAY, SEPTEMBER 12TH!

There’s a plain pillow out there just waiting for your creativity.

Judges: Judy Novella, Marketing Manager at Fairfield Processing; Anne Adams, Creative Director and Liz Johnson, Senior Editor at Sew4Home; Nancy Jewell, Consumer Marketing Manager at Westminster Fibers Lifestyle Fabrics; Lissa Alexander, Director of Marketing at Moda Fabrics; Kathy Miller, Co-founder/President and Creative Director at Michael Miller Fabrics; Angela Walters, Author and Free Motion Quilting Expert; and Jo Packham, Founder and Editor of Where Women Create.

See the Pillow Personality Contest Rules for additional details.

Subscribe
Notify of
guest

*Sew4Home reserves the right to restrict comments that don’t relate to the article, contain profanity, personal attacks or promote personal or other business. When commenting, your name will display but your email will not.

0 Comments
Inline Feedbacks
View all comments
  FOLLOW US!
Translate »