Click to Enlarge

This is exactly the project you’ve been waiting for: the Zero Calorie box of Valentine’s chocolate! Our theme of chubby holiday hearts continues with these plump little pillows. We added a pleated chiffon sash across the center to give them the look of the classic heart-shaped boxed of assorted chocolates. Secret Tip: hidden inside layers of batting and muslin keep our hearts smooth and round. They are fast and easy to make and take just small cuts of fabric; use used Fat Quarters of Hoopla by Moda for ours. They’ll make a perfect gift for everyone you love, because just like Forrest said, “Life is like a box o’ chocolates!”

Click to Enlarge

This is exactly the project you’ve been waiting for: the Zero Calorie box of Valentine’s chocolate! Our theme of chubby holiday hearts continues with these plump little pillows. We added a pleated chiffon sash across the center to give them the look of the classic heart-shaped boxed of assorted chocolates. Secret Tip: hidden inside layers of batting and muslin keep our hearts smooth and round. They are fast and easy to make and take just small cuts of fabric; use used Fat Quarters of Hoopla by Moda for ours. They’ll make a perfect gift for everyone you love, because just like Forrest said, “Life is like a box o’ chocolates!”

Thanks to our friends at Moda Fabrics for providing us with their Hoopla pre-cuts for all our Valentines projects. Though not a traditional ‘hearts & flowers” motif, we love the bright and happy colors and playful patterns.

Click to Enlarge

Sewing Tools You Need

Fabric and Other Supplies

Click to Enlarge

Supply list is for ONE pillow

  • ½ yard of 44-45″ wide fabric for pillow front or ONE Fat Quarter
  • ½ yard of 44-45″ wide fabric for pillow back or ONE Fat Quarter
    NOTE: For our three sample pillows we used Fat Quarter pre-cuts from the Hoopla collection by Moda Fabrics: Modern Floral White front with Purple Tiny Cherries back; Modern Floral Lime front with Lime Basket Weave back; Tulips on Red front with Modern Circles Pink back.
  • ½ yard of 44-45″ wide chiffon for pillow sash: we used a bright white
  • ½ yard of 44-45″ wide muslin for interior pillow construction
  • ½ yard of 44-45″ wide lightweight batting for interior pillow construction: we used Kyoto Bamboo Batting from Fabric.com
  • One small bag of polyester fiberfill for pillow stuffing: we used Poly-fil by Fairfield
    NOTE: Use the best fiberfill you can find and afford; the quality really makes a difference in the outside appearance.
  • All purpose thread to match all fabrics
  • See-through ruler or yardstick
  • Fabric marker, pen, or tailor’s chalk
  • Iron and ironing board
  • Hand sewing needle
  • Scissors or rotary cutter and mat
  • Straight pins

Getting Started

  1. Click the Buy Pattern button below to get the pattern sheet(s) required for this tutorial. The pattern, which includes instructions, is $1.29.

    (buy pattern button)

    IMPORTANT: Our patterns are sized to print on standard 8½” x 11″ paper. You must print the PDF file(s) at 100%. DO NOT SCALE to fit the page. There is a guide rule on each sheet so you can confirm your final printout is to scale.

  2. Cut out the pattern pieces along the solid lines.
  3. Following the diagram on the printouts, butt the two pattern pieces together and tape in place. Do NOT overlap. You now have one Heart Pillow Template that resembles half a heart shape. Set it aside
  4. From the chiffon fabric you are using for the pillow sash, cut:
    ONE 8″ high x 22″ wide rectangle. This will be your Upper Pillow Sash
    ONE 8″ high x 23″ wide rectangle. This will be your Lower Pillow Sash
  5. From the fabric for the pillow front, cut ONE 13″ high x 16″ wide rectangle. This will be your Front Pillow Panel.
  6. From the fabric for the pillow back, cut ONE 13″ high x 16″ wide rectangle. This will be your Back Pillow Panel.
  7. From the cotton muslin, cut TWO 13″ high x 16″ wide rectangles. These will be your Muslin Panels.
  8. From the fleece-type batting, cut TWO 13″ high x 16″ wide rectangles. These will be your Batting Panels.
  9. You should now have SIX matching rectangles.
  10. Fold one rectangle in half widthwise, so you now have a 13″ high x 8″ wide rectangle.
  11. Pin the Heart Pillow Template through both layers of fabric, lining up the ‘place on fold’ edge of the template on the fold line of the fabric.
    Click to Enlarge
  12. Cut out around heart template shape, remove pins, and set aside.
  13. Repeat to cut a heart from the remaining five rectangles.

At Your Sewing Machine & Ironing Board

Prepare the front and back panels

  1. From the six hearts you just cut, we are going to create two ‘fabric sandwiches.’ This is thanks to a tip from our friend and home décor expert, Donna Babylon. Donna’s technique for a smooth, specialty-shaped pillow – especially when using lightweight cotton, is to add a layer of batting and muslin to the main decorator fabric. These additional layers smooth and stabilize the surface of the pillow.
  2. Place the Front Pillow Panel right side down on your work surface. Place a Batting Panel on top of the Front Pillow Panel, then place a Muslin Panel on top of the Batting Panel. Align all three layers around the outside edges.
    Click to Enlarge
  3. Pin around the entire outside edge through all 3 layers.
  4. Sew the layers together, using a ¼” seam allowance.
    Click to Enlarge
  5. Repeat these steps to create the three-layer Back Pillow Panel.
  6. Set both of assembled panels aside.

Create the sashes

  1. On each Pillow Sash, make a narrow
  2. If you have a serger, you can simply serge these three sides, which is what we chose to do.
    Click to Enlarge
  3. Flip over the Front Pillow Panel so the right side is facing up.
  4. Using your tape measurer, measure 5″ from the apex of the heart up and along the top edge of the heart’s right curve.
  5. Pin the left edge of the Upper Pillow Sash to the Front Pillow Panel at this 5″ point.
  6. Measure 1¾” from the sash edge, and place another pin.
    Click to Enlarge
  7. At this second pin, pinch the sash fabric over the pin to make a ½” pleat, then fold the pleat down and pin it to the Front Pillow Panel.
  8. Measure 2¼” from the edge of this first folded pleat, and place another pin.
    Click to Enlarge
  9. At this second pin, just as you did above, pinch the sash fabric over the pin to make a ½” pleat, fold the pleat down and pin it to the Front Pillow Panel.
  10. Finally, pin the right edge of the sash to the Front Pillow Panel.
    Click to Enlarge
  11. Stitch the Upper Pillow Sash to the Front Pillow Panel with a ¼” topstitch, and remove the pins.
  12. Repeat these steps to attach the Lower Pillow Sash, but start the right edge of the lower sash 2½” from the bottom center of the heart along the left edge.
    Click to Enlarge
  13. Gather the Upper Pillow Sash and the Lower Pillow Sash into the center of the Front Pillow Panel. You can pin the sash tails in place to insure they stay out of the seam.
    Click to Enlarge

Finish the pillow

  1. Place the pillow front and pillow back right sides together, lining up all edges. Pin the panels together. Make sure those sash tails won’t be caught in the seam.
    Click to Enlarge
  2. Sew front and back together, using a ½” seam allowance all around. Be sure to leave a 4-5″ opening along the lower right side of the pillow for turning right side out. Also remember to back tack at the beginning and end of the seam, on either side of this opening.
  3. Trim the outer seam allowance to ¼” EXCEPT at the opening. Leave the seam allowance ½” at the opening.
    Click to Enlarge
  4. Turn the pillow right side out through the opening.
  5. Stuff the pillow with polyester fiberfill. The pillow should be stuffed so it is pleasingly plump. Take a handful of loose fiberfill and fluff the fibers with your fingers to remove any clumps. To do this, gently separate the fibers as if teasing hair. Insert these small handfuls of fiberfill, starting with the curves of the heart and working toward the center.
  6. Using your hand sewing needle and thread, slip stitch the pillow opening closed. Keep your stitches small so the fiberfill won’t poke out.
  7. Tie a bow with the sashes on the front of the pillow. The bow should be towards the top of the heart, not in the very middle. This looks more like the traditional ‘box of chocolates’ ribbon.
    NOTE: The sash measurements above will result in a full and flouncy bow like ours. If you’d prefer a tighter bow, cut your sashes shorter. If you’d prefer a floppier bow or longer tails, cut your sashes longer.

Click to Enlarge

Contributors

Project Concept: Alicia Thommas

Sample Creation and Instructional Outline: Gregory Dickson

Subscribe
Notify of
guest

*Sew4Home reserves the right to restrict comments that don’t relate to the article, contain profanity, personal attacks or promote personal or other business. When commenting, your name will display but your email will not.

0 Comments
Inline Feedbacks
View all comments
  FOLLOW US!
Translate »