Janome 9900-Leaderboard Left

Facebook Twitter Sew4Home RSS Feed Follow Me on Pinterest Instagram

Sew4Home

Embrace Double Gauze Ruffled Scarves: Fabric Depot & Shannon Fabrics

Printer-friendly versionSend by emailPDF version

Soft and light as a cloud, our double gauze scarves are the perfect accessory for the warmer weather headed our way. Their deep ruffled ends add just the right bit of flounce without too much bulk. In fact, the design is so lightweight, you can twist two scarves together for a beautiful blend of color and pattern. And because they’re super fast and easy, you’ll definitely want to make two or four or even more! Some for you and some for gifts… or all for you; we’ll never tell. We used the Embrace Double Gauze by Shannon Fabrics from Fabric Depot. There are brand new designs and colors in stock and ready to be part of your wardrobe. 

When the double gauze fabrics first came out, most were adorable baby prints in soft colors that mix well with traditional pastels. We made a cute set of Ergonomic Burp Cloths that put these sweet combos to excellent use.

However for our scarves, we didn’t want nursery designs, so we were thrilled when Fabric Depot got in the new Embrace collections from Shannon Fabrics that feature more graphic designs in a wider range of colors. We love the buttery yellow and teal leaves of our sample scarves, but couldn’t help but put together a few other options (shown above). Shop the entire selection at Fabric Depot to pick your favorites.

You likely recognize regular gauze for its sheer open weave. In fact, the process that creates gauze is even called "gauze weave" (or "leno weave"). This weaving process twists two warp yarns around the weft yarn in a figure eight pattern, resulting in a strong yet sheer fabric. Double gauze is just that, two layers of gauze. Teeny tiny stitch tacks, so teeny and tiny as to be invisible from the right side of the fabric, hold the layers together. These double layers help eliminate the super-sheerness of standard gauze and give the fabric a bit of extra weight, which imparts a wonderful, almost velvety drape.

Our thanks to super sponsor, Fabric Depot for providing the fabric for our scarves. If you're new to shopping on FabricDepot.com, make sure to sign up on the home page to get their emails so you're the first to know about all the great products, deals, and sales that are happening every day! 

If you're in the Portland, Oregon area, be sure to make plans to visit their 40,00 square foot retail location for a day of dream shopping. And though e-commerce has their own dedicated warehouse space, they can also get you fabrics from the store. If you can't find what you’re looking for on FabricDepot.com, contact them and they will help create a special-order just for you. 

Shannon Fabrics is an industry leader in all things soft. Not only do they bring us Embrace Double Gauze, they also have super soft Cuddle, fabulous faux furs, terry cloth, and silky satin. Check out all of softness online

Our long, lush scarves finish at approximately 70”.

If you love these scarves, you may may also like our striking shawl wrap in double gauze with tiny pom pom accents.

Sewing Tools You Need

Fabric and Other Supplies

Quantities shown below are for ONE scarf

  • 1¼ yards of extra-wide double gauze or similar; we used Embrace Double Gauze by Shannon Fabrics from Fabric Depot in Banana and Stem to Stem in Teal  
    NOTE: Because gauze is a natural fiber, the width can vary quite a bit. In general, get a nice wide width. If you can't get a full 51" cut as we suggest, cut as wide as you can WOF (width of fabric), then increase the depth of the ruffle panels to compensate. For example, if your gauze is 50", cut the center panel at 50" x 21" and cut the two ruffle panels at 22" x 21" .  
  • All-purpose thread to match fabric
  • See-through ruler
  • Fabric pen or pencil
  • Seam gauge
  • Seam ripper
  • Scissors or rotary cutter and mat
  • Iron and ironing board
  • Straight pins 
  • Hand sewing needle

Getting Started

  • From the double gauze for each scarf, cut the following:
    ONE 51” x 21” rectangle for the center of the scarf
    TWO 21” x 21” squares for the ruffled ends 
    NOTE: Many of the Embrace Double Gauze designs have lovely random motifs, so you can simply make straight cuts and you’re good to go. If you use a motif that is more directional (such as our sample in the Stem to Stem) or wish to feature a particular part of a design, you may want to buy ¼ yard extra to allow you to be able to fussy cut the main center panel. Center your chosen part of the motif, measuring both top to bottom and side to side and remembering that our design has a seam at the center back, which means it must truly be centered in both directions. 

At Your Sewing Machine & Ironing Board

Center panel

  1. Fold the main fabric piece in half, right sides together, so it now measures 51" x 10½". Pin in place to form a long tube.
  2. Leave a 6” opening in the center for turning right side out.
  3. Using a ½" seam allowance, sew along the 51" side. Secure your seam at either side of the 6” opening. 
  4. Roll the tube so the seam is centered down the length of the scarf. Your seam line now represents what will be the center back of your scarf. If you have a fussy cut design, make sure the “front panel” of the scarf looks centered as you’d wanted. If not, you can roll the seam slightly off center one way or the other to compensate. Press the seam open, pressing back the raw edges around the opening so they are flush with the sewn seam.
  5. When flat and with the seam centered, snip off a tiny bit of each corner (less than ½"). This helps mark the fold, so later, when you are inserting the ruffle, you have reference points to insure your tube will finish with a centered motif and the seam down the middle of the back. 

Ruffles

  1. Fold each of the 21" x 21" ruffle pieces in half (21" x 10½"), right sides together. 
    NOTE: The folded edge is the bottom edge of the ruffle; be sure to remember this if your fabric has a directional motif.
  2. Using a ½" seam allowance, sew both short ends (the 10½" ends). Be sure to backstitch at the beginning and end.
  3. Trim off the corners at a diagonal. 
  4. Press open the seam allowances.
  5. Turn the ruffle piece right side out. Push out the corners with your finger or a blunt-end tool, like a large knitting needle or a chopstick. Steam lightly to press flat with the seams running down each side.
  6. Sew two lines of gathering stitches along the raw edges of both ruffle pieces. 

    NOTE:
    If you are new to this technique, take a look at our tutorial on machine gathering.
  7. Pull the bobbin threads of the gathering stitches to gather each ruffle panel to approximately 10" wide.
  8. With the ruffle panel right side out and the center panel wrong side out, slip one ruffle panel inside each end of the center panel tube so the two pieces are right sides together. 
  9. At each end, align those little clipped corners you made at each end of the tube with the side seams of each ruffle panel. 
  10. When positioned and flat, pin in place through all the layers.
  11. Using a ½" seam allowance, stitch through all the layers along each end.
  12. Grade the seam allowance, trimming the seam allowance of the tube shorter than the seam allowance on the ruffle. 
  13. Turn the scarf right side out through the opening in the back seam.
  14. Pull out the ruffles and steam lightly along each seam.
  15. Slip stitch the opening in the center seam of the body closed. 

    NOTE: Our double gauze layers laid perfectly smooth and flat with no twisting when we turned the scarf right side out. If you feel your scarf is not behaving quite as well, you can add a line of topstitching along each ruffle/scarf seam approximately ¼" from the seam line, within the body of the scarf.

Contributors

Project Design: Alicia Thommas  
Sample Creation and Instructional Outline: Debbie Guild

Section: 

Comments (9)

Liz Johnson.Editor.Sew4Home said:
Liz Johnson.Editor.Sew4Home's picture

@ Peggy - Thanks! They are fun; hope you give them a try.

YellowRose said:
YellowRose's picture

I love quick and easy projects to infuse a bit of Spring into my wardrobe.  I'll be ordering some fabric and sewing before you know it. Thanks for the tutorial.

Liz Johnson.Editor.Sew4Home said:
Liz Johnson.Editor.Sew4Home's picture

@ YellowRose - Thanks! Let us know how your scraves turn out!

gracious said:
gracious's picture

  My granddaughters love to wear scarves but both are very short, one being only 4' 9", the other 5' even.  Your scarf is almost    6' in length.  Is there a length/height ratio formula I can use to accomodate their height?  Thank you.

Liz Johnson.Editor.Sew4Home said:
Liz Johnson.Editor.Sew4Home's picture

@gracious - If one or both of your granddaughters have a scarf they like, you could use that as a guide. You might be surprised just how long their scarves actually are. It makes them easier to twist and wrap. We wouldn't recommend going a great deal shorter, even on a shorter person. You could also drape a tape measure around their necks to determine the best finished length. Regarding proportion, the center panel should be about 5x as long as one ruflle panel. In our sample, the center panel is 50" and each end panel is 10".

Ellen Mickelson said:
Ellen Mickelson  's picture

So pretty! What a great and unique idea! We love ruffles! We also love the idea that you can mix a few scarves together.

As always, your instructions, step-by-step images, links, and tips are very very helpful and easy to understand!

Thanks for another great sewing tutorial!

-Ellen

Liz Johnson.Editor.Sew4Home said:
Liz Johnson.Editor.Sew4Home's picture

@ Ellen - Thanks! They are so soft and fun to twist and tie. 

Add new comment

*Sew4Home reserves the right to restrict comments that don’t relate to the article, contain profanity, personal attacks or promote personal or other business.
By submitting this form, you accept the Mollom privacy policy.