New Janome 15000-Leaderboard Left

Facebook Twitter Sew4Home RSS Feed Follow Me on Pinterest Instagram


How to Make a Rolled Hem with Your Sewing Machine

Printer-friendly versionPDF version

There's always a certain amount of hemming and hawing about having to hem. Just about every project you do includes some sort of a hem, and there are so many techniques from which to choose. There is the simple double-turn hem, blind hem, faced hem, covered hem, taped hem, curved hem, single hem, narrow hem, cuffed hem, and bias hem. Then there are all the special hemming techniques for certain fabric types, such as leather, fur or lace, as well as projects with scalloped edges or pleats. Whew! But with even with these choices, there is one particular type of hem we receive more questions about than any of the others: the rolled hem. Since it's at the top of our You Asked 4 It list, let's get rollin'. 

Not to be confused with a narrow hem, the rolled hem is created using a special sewing machine foot, in our case: Janome’s Hemmer foot. A rolled hem can also be sewn completely by hand or on a serger. In this tutorial, we'll focus on how to sew a rolled hem on a sewing machine, along with a few other hints and tips to help you conquer this somewhat elusive technique.

As with all areas of sewing, you must always consider the type of fabric you’re sewing. This will determine thread type and size, as well as the type and size of sewing machine needle to use. As a rule, you sew rolled hems on items that are made of lightweight to medium weight woven fabrics. For these fabrics, we recommend using cotton wrapped polyester thread and an universal needle size 70/10 or 80/12.

You've seen rolled hems on all kinds of items. It’s commonly used on garments made of delicate fabrics, such as special occasion wear, lingerie or in heirloom sewing. A rolled hem on a garment is designed to weight the bottom so it hangs properly. In home décor applications, rolled hems are often the choice for window treatments; sheer panels are wonderful when finished with a rolled hem. Try one on our Romantic Retreat Layered Bed Curtain panels. Other items that look great with a rolled hem are napkins and tablecloths. 

When preparing your fabric, it’s important to account for the hem depth – no matter which kind of hem you plan to create. We recommend planning your hem finish prior to cutting your fabric. Sometimes, if you run into a mishap in your cutting and are a bit short, a rolled hem can save the day because it requires such a small amount of fabric.

The basic rolled hem 

In our example, we are using a woven cotton fabric that is easy to press. Your results may vary slightly, depending on the type of fabric you’re using. As with most techniques, sew slowly... in this case, it helps maintain the roll of the fabric into the foot as well as the accuracy of the stitching. Also, as usual in our demonstrations, we are using a solid fabric with a contrasting thread to best show the stitching. You would normally use a thread to match your fabric, unless you were aiming for a decorative look. 

  1. Press the edge of the fabric ⅛" to ¼" to the wrong side, depending on the width of the hemmer foot you’re using (see more about different width feet below). With a rolled hem, you normally do not use any pins.
  2. Set up your sewing machine for a straight stitch. 
  3. Attach the Hemmer foot.
  4. Place the fabric under the foot, wrong side up.
  5. Before lowering the presser foot, fold over the pressed edge so the needle is even with the edge of the fold and the guide on the foot. Your raw edge is now hidden within this second fold.
  6. Lower the foot to hold the fabric in place.
    NOTE: If your sewing machine has a knee lift feature, now is a great ime to use it so you don't have to remove your hands from the fabric.
  7. Lower the needle into the fabric. The needle should be right at the fold of the fabric
  8. Lift the pressure foot, but keep the needle down in the fabric.
  9. Holding the edge of the fabric taut, insert the fold up and over into the guide of the foot.
  10. Begin to sew, continuing to hold the fabric taut, but not tight, allowing it to easily feed into the foot.
  11. The finished rolled hem will look like this. 

Alternate methods for starting a rolled hem

Depending on the type of project you’re sewing, sometimes you need to start the rolled hem from a corner. In this case, it can be challenging to get the fabric sewn evenly from the edge. You can try one of two methods.

Tearaway stabilizer

Placing a small rectangle of tearaway stabilizer underneath the fabric will help prevent the edge of the fabric from being pulled down under the sewing machine's needle plate. In addition, you can use the stabilizer to pull the fabric past the foot until you're just beyond the corner of the fabric, where you can begin to sew smoothly along the edge again. 

  1. Prepare your fabric and sewing machine in the same manner as above.
  2. Cut a small rectangular piece of tearaway stabilizer. The piece we used was approximately 1” x 2”.
  3. Place the fabric under the foot, following the same steps as above. 
  4. Place the tearaway under the corner of the fabric, so the majority of the rectangle extends beyond the corner. 
  5. Pull the stabilizer firmly to begin sewing from the edge. 
  6. Continue with the rolled hem as described above.

Hand thread tail

Another method to help start fabric at a corner is to use a hand sewing needle and approximately 10” of thread. 

  1. Thread the needle with the 10” of thread.
  2. Insert the needle into the folded portion of the fabric about ⅛" from the raw edge.
  3. Pull the length of thread halfway through the fabric.
  4. Slide the needle off the thread.
  5. Follow the same steps as above to prepare your fabric, then place it under the foot.
  6. Use the thread tail to gently pull the fabric as you begin to sew the rolled hem.  

Rolled hems on slippery fabric

If you are planning to sew a rolled hem on a slippery or silky type of fabric, you'll quickly discover these fabrics do not like to be pressed along the edge. You can try, but usually, the standard ¼" fold we use in rolled hems, will simply unfold. This prevents you from getting an even fold inserted into the guide on the foot. For this, we have a great solution! All you need to do is sew a line of stitching approximately ¼" (again depending on the width of your hemmer foot) along the raw edge. This line of stitching acts as a folding guide to allow you to more easily press the fold needed to sew a rolled hem. Once pressed, this seam also helps hold the fold in place.

  1. Set up your sewing machine for a basic straight stitch.
  2. Sew along the raw edge with a ¼" seam allowance. Your fabric is single layer here. You could use a Quarter Inch Seam foot for this step. 
  3. Fold and press the fabric to the wrong side along the raw edge, using the stitching as your guide. 
  4. Now you'll be able to fold the fabric over to sew the rolled hem!
  5. Follow the steps to complete the rolled hem as described above.


If you decide to try sewing rolled hems on your next project, you may need to know how to turn a corner. You can approach this in two ways: a square corner or a mitered corner. 

A square corner is the simpler of the two techniques, but there will certainly also be situations that call for the more professional finish of a mitered corner. Regardless of which method you choose, you will sew each side individually.

NOTE: Depending on the fabric type, especially for a bit thicker fabric, you may need to add a few hand tacking stitches at the corner where you can't quite catch the corners evenly.

Square corners

  1. Prepare fabric for a rolled hem as described above.
  2. Sew a rolled hem along one side of your project, following the steps for a basic rolled hem and using stabilizer or a thread tail to start if required.
  3. Remove the fabric from the machine.
  4. Press the next side as needed, folding the corner over the previously sewn rolled edge.
    NOTE: You may find clipping back the corner at a slight angle before folding prevents the fabric from sticking out at the corner.
  5. Place the fabric back under the foot and sew another rolled hem. We recommend using a rectangular piece of tearaway stabilizer to help get over the "hump" at the corner.
  6. Sew the rolled hem along the next side.
  7. Remove the fabric from under the foot and the tearaway from the corner. The corner will look like this, except... your thread will likely be the same color as your fabric!
  8. Continue around each side in the same manner until complete.

Mitered corners

  1. Fold down the corner point ¼" so it forms a diagonal line across the corner.
  2. Sew as close as possible to this folded edge.
  3. Trim away the point as close to the stitching as possible.
  4. Repeat for the remaining corners.
  5. Press the fabric to the wrong side along one side, starting at the clipped edge, in the same manner as if starting a basic rolled hem.
  6. Sew the rolled hem as described above. Here again, we recommend using tearaway at the corner.
  7. Remove the fabric from the machine.
  8. Prepare the next side, angling the fabric at the corner to create a miter.
  9. Sew the rolled hem, starting at the corner. Don’t forget that helpful piece of tearaway stabilizer.
  10. Here's a finished mitered corner. Ours looks just a tad messy because of the contrasting thread. With matching thread, it would be super pretty.
  11. Continue around each side in the same manner until complete.

Cross seams 

  1. In certain projects, you may have to cross over an existing seam with a rolled hem. We often see this in garment sewing. The bulk of the cross seam can be too much for the hemmer foot. 
  2. In order to keep your rolled hem smooth, you can cut the seam allowance at an angle on the cross seam to help eliminate the bulk.
  3. Or, you can jump over the seam and sew the rolled hem with the fabric flat – without putting the folded edge into the guide on the foot. To do this, when you approach the cross seam, stop with the needle in the down position 
  4. Gently slide the fabric out of the guide on the foot, but without removing the fabric completely from the machine. Turning the fabric slightly will help, just remember to straighten out before you start sewing. 
  5. Sew along the folded edge with the fabric flat under the foot.
  6. Once you are beyond the cross seam, stop with the needle in the down position, insert the folded edge back into the guide on the foot, and resume the rolled hem.

    NOTE: Another cross seam option is to stop before the cross seam, back stitch, take the fabric completely out of the machine, then replace it under the foot again beyond the cross seam. Insert the fold back into the foot and resume sewing the rolled hem. Once you’ve sewn as much of the rolled hem as possible, go back and fill in the hem at the cross seams separately. Just remember to backstitch at the beginning and end of your short lines of stitching. Believe it or not, no one will inspect your rolled hem to see where you stopped stitching and filled in the stitches later.

Hemming around a circle 

  1. If your project is in the shape of a circle, like a skirt, you will need to use a similar approach to ending the rolled hem.
  2. As you approach the point where you started, you will have to slide the folded edge out of the foot and sew the remaining hem flat, exactly how we sewed over cross seams in the section above.

Different width feet 

Since Janome is our exclusive sewing machine sponsor, they were kind enough to provide us with a selection of Hemmer feet for our S4H studio machines. 

The standard Hemmer foot is 2mm wide and comes standard with most Janome models. You can also purchase the optional Hemmer Foot Set, which contains two additional feet: a 4mm Hemmer foot and a 6mm Hemmer foot. We recommend visiting your local sewing machine retailer to find the appropriate feet available for your machine model and/or brand.

You can clearly see the differences between the Hemmer feet we have here in the S4H studio. 

You can get an idea of the width of the rolled hem you will achieve with each foot by looking at the underside. The channel under each foot allows the rolled hem to easily flow out the back of the foot. 

Determining which foot to use is fairly simple. The weight or thickness of your fabric will be your guide. The thinner the fabric, the thinner your rolled hem. Or, you may determine which one to use based on the depth of the rolled hem itself, especially if you are planning a decorative effect. Create a rolled hem with each size foot on a few scraps to test your decision. 

Zig zag rolled hem

You do not have use a straight stitch for a rolled hem. You can also use a zig zag. 

If you look at the Hemmer foot more closely, you can see there is a wide opening where the needle goes through the foot. 

It’s designed this way in order to be used with a zig zag stitch, because sometimes the kind of fabric we like to finish with a rolled hem is also the kind that frays easily, such as a sheer. One of the best ways to combat this is with a zig zag stitch.

Prepare your fabric and set up your sewing machine the same as for a basic rolled hem, but instead of selecting a straight stitch, select a zig zag stitch. Your finished rolled hem will look like this.

NOTE: We definitely recommend practicing on scraps first to determine the width and length of your zig zag stitch.

Serger rolled hem

Since we’ve mentioned it, we thought it would help for you to see what a rolled hem looks like when created with a serger. The premise is the same. The raw edge of the fabric is folded under and stitches hold the fold in place. However, since the nature of a serger is much different than a sewing machine, the edge of the fabric is trimmed, folded over, and wrapped with a 2-thread or 3-thread overlock stitch along the folded bottom edge all at one time – in one pass through the machine. This may look familiar to you from items you’ve purchased in stores. 


Our last words of advice are: practice, practice, practice!  Making a successful rolled hem takes a little patience, but the more you do it, the easier it becomes. Remember, you can always stop, remove some stitching, and start sewing again on an already rolled section until you can get the fabric rolling into the foot again.


Sample Creation and Instructional Outline: Jodi Kelly


Comments (39)

Sue123 said:
Sue123's picture

i have an issue when I do a rolled hem on the cross cut side of cotton fabric (or the stretchy side),  it gets all wavy. Is there a way to prevent this? 

Liz Johnson.Editor.Sew4Home said:
Liz Johnson.Editor.Sew4Home's picture

@Sue123 - With this type of hem, some wave or curl is inevitable. In most cases, pressing well with steam should flatten it. In addition, the closer you sew to the top edge, the less the hem will curl.

Zuke913 said:
Zuke913's picture

Very easy directions and great pictures to go with each step. Thanks for sharing. I am trying to learn how to do this, I am finding it extremely frustrating. I will try again using your directions.

Liz Johnson.Editor.Sew4Home said:
Liz Johnson.Editor.Sew4Home's picture

@ Zuke913- Thank you -- it can be a bit of a learning curve, but we're glad to know we've helped give you the confidence to try again!

Andrea S said:
Andrea S's picture

This was very helpful and very nicely presented, making it easy to follow. Thank you.

Liz Johnson.Editor.Sew4Home said:
Liz Johnson.Editor.Sew4Home's picture

@Andrea - Thanks so much for taking the time to leave us a note. We're happy that you found the information so helpful. Come back often for more great tutorials... and bring all your friends 

Teresa B. said:
Teresa B.'s picture

Thanks so much for this! As a long time sewer, I have often struggled with the rolled hem; these are great forehead-slap-now-why-didn't-I-think-of-that ideas! And being able to download the tip as a .pdf for offline use - priceless! Thank you for sharing your knowledge!

Liz Johnson.Editor.Sew4Home said:
Liz Johnson.Editor.Sew4Home's picture

@Teresa - So glad we could help. We totally get it -- I have a permanent bruise from all my forehead-slap moments!

teresa said:
teresa  's picture

this is the best instruction ever, many people's givers you tips,but not like this.i got so much understanding from you.i will be doing a lot of rolled hems ,now. thanks a lot.

Liz Johnson.Editor.Sew4Home said:
Liz Johnson.Editor.Sew4Home's picture

@teresa - So glad to have helped with a new skill! Enjoy!

maryjobo said:
maryjobo's picture

Very helpful information and photos!  I'm making a set of napkins as a gift and want to make them look as professional as possible.  I used the 6mm hemmer foot for the hem of a circle skirt and it was fabulous, but I wasn't sure how to handle the corners on a square napkin, so this will be very helpful. 

Liz Johnson.Editor.Sew4Home said:
Liz Johnson.Editor.Sew4Home's picture

@ maryjobo - so glad we could help! Hope you'll come back often for more info and ideas 

Liz Johnson.Editor.Sew4Home said:
Liz Johnson.Editor.Sew4Home's picture

@ aziza - so glad to know you found it helpful. Enjoy your new skill!

Felicity said:
Felicity's picture

Good Day, Does anyone know where i can get a Empisal 406e rolled Hem Throat Plate.  Inherited a machine and does not have one. Any one have a spare they willing to sell and how much?  Thanks can be reached on email - 

Liz Johnson.Editor.Sew4Home said:
Liz Johnson.Editor.Sew4Home's picture

@ Felicity - so sorry, we're not at all familiar with that model. Sounds like additional web searching is in your best bet. 

AuntieSusie said:
AuntieSusie's picture

 What a superb tutorial! I have recently found your site and I've spent hours and hours going through your tips and tricks and tutorials.  I just love it! Thank you for providing such useful and practical info!

Liz Johnson.Editor.Sew4Home said:
Liz Johnson.Editor.Sew4Home's picture

@ AuntieSusie - Welcome aboard! We're do glad you're finding information and inspiration. 

Eunice Hayes said:
Eunice Hayes's picture

I'm trying to hem poly chiffon on my Janome...the issue is when the fabric is cut on the bias....or even slightly off-grain. When a friend asks you to hem their daughter's prom dress, and you want it to look as perfect as the original hem, what's a girl to do? Do I need a stabilizer under all the million yards of the very flowy skirt, or just under the slightly off-grain sections? I can do these hems perfectly (without stabilizer) on the straight of grain.

Sarah Ripley said:
Sarah Ripley's picture

Hi, I've hemmed countless dresses/skirts in chiffon without any stabliser. You need to make sure that the cut is smooth without any threads and that the hem is level. Poly chiffon is slightly harder than silk chiffon, I find that a slight tension grip when the fabric goes through the foot helps. This is probably far too late for you but hope you managed ok! 

Liz Johnson.Editor.Sew4Home said:
Liz Johnson.Editor.Sew4Home's picture

@ Eunice Hayes - I'm sorry, but that is not an issue we've run into. Perhaps a call to your local Janome dealer is in order. You are a good friend to do all that hemming!!

Janine Gouws said:
Janine Gouws's picture

I live in South Africa. I have e a problem with my machine. Does not pull bobbin cotton to the top. I have taken my machine to have seen to, sew once, and does the same thing. Can someone please help with advice. Fedup

Liz Johnson.Editor.Sew4Home said:
Liz Johnson.Editor.Sew4Home's picture

@ Janine Gouws - I'm sorry, but that really is an issue a sewing machine dealer needs to diagnose. Specific technical issues are almost impossible to troubleshoot long distance. The action of pulling up the bobbin thread is controlled by the rotary hook. It has to be in proper alignment with the main needle.

SuwanneeMama said:
SuwanneeMama's picture

I don't have a good machine like a Janome.  I have an inexpensive but adequate Singer.  Do machines like this have other feet available?  It's all I've ever uses aside from a White machine, circa 1937.  If so, any idea where I might find one?  I live in a very small rural town with only a Walmart! 

Liz Johnson.Editor.Sew4Home said:
Liz Johnson.Editor.Sew4Home's picture

@ SuwanneeMama - This is a pretty standard foot that you should be able to find for your machine. Regarding where, a web search using your machine make and model number along with the words "rolled hem foot" and "where to buy" - should give you some options for buying online. 

Ava said:
Ava's picture

This is the most comprehensive rolled hem tutorial I have seen. I get it now! Thank you! This will make costuming for my soft sculpture dolls so much easier. 

Alice Johnson said:
Alice Johnson's picture

The corners have always defeated me.  Thanks so much for this tutorial.  I love my vintage machines and have always wanted to use the many hemmer feet that I have for them.  

variadee said:
variadee's picture

Learning this technique has been on my list for a very long time. Thank you.

Kris Valle said:
Kris Valle's picture

I usually use the serger for my rolled him and I really like it. But I enjoyed learning about other options. I found the cross seams demo really interesting. Thank you!

norskie3 said:
norskie3's picture

Thank you for this super tutorial!  I have done wider turned hems, but have not known how to do a rolled hem on delicate fabric.  Again, you have been a great educator for me!

fabriclover7 said:
fabriclover7's picture

I also have the Janome 6600 sewing machine. I have used the hemmer foot that comes with it just recently. In  answer to designerpillows question, yes it can be done without pressing all the edges, The beginning point needs to be turned under some to get started, but from there it will roll itself. This is the beauty of having this foot. There is a video on Janome's website: that shows how not only to use the hemmer foot but also the other speciality feet. I have referred to their site often to learn more about my wonderful Janome. I just went to it, and it seems they have redone their site for newer and greater techniques and ideas. I  will have to go and see what else I can learn. It is a perfect match up with Sew4Home. Between the two sites, I will never be able to do all the wonderful ideas they inspire me to do, but it will be fun trying! 

eileenlaurette said:
eileenlaurette's picture

I agree.  I was always taught that the rolled hem foot does both folds for you, as long as you anchor stitch the first centimeter or so (flat) underneath the foot, then stop with the needle down and secure the remaining edge into the rolled edge of the foot.  You can pre-press that first fold if you have woven cotton fabric, but when I'm hemming a metric ton of chiffon during prom season, you can bet that I don't even try to press before rolling - it won't stay anyway.  The foot is designed to do the double fold process for you, but there are a lot of techniques for getting it to stay in the folding edge so it will do so.  There are a lot of great videos on YouTube that address different fabrics, rolling a hem with bias edges (like a circle skirt), etc.  using this foot - it is a great accessory and a real time-saver!  Just practice on scraps first to get the hang of it before attempting a bigger project.  

designerpillows4u said:
designerpillows4u's picture

Sorry for the double post but I didn't think it went through the first time. :(

designerpillows4u said:
designerpillows4u's picture

Thanks for the great tutorial!  Question:  I used to run a professional roll hemmer machine and it had a foot or attachment very similar to these feet but I didn't have to press the fabric over at all.  The fabric went into the foot raw edged and the foot itself rolled it for you and sewed it at the same time.  Will these feet not work the same way?  I've tried it and can't seem to get mine to work that way but it seems that is how they are made to do just that.  Can you explain please?

Liz Johnson.Editor.Sew4Home said:
Liz Johnson.Editor.Sew4Home's picture

The steps above are what are recommended for home-use machines to create the best results. I'm afraid we did not have access to and so did not do any comparison with an industrial model.

az10sgal said:
az10sgal's picture

Great one I have seen.  I'm am still trying to master my rolled hem foot and I see many tips that I haven't seen before.  Can't wait to try again!  Thank you for the great detail and photos.