2019_Pincushion_new logo

Facebook Twitter Sew4Home RSS Feed Follow Me on Pinterest Instagram


Patchwork Bed Runner with Free Motion Quilting

Printer-friendly versionPDF version

The biggest sewing category around the world is quilting. If you've been thinking about jumping on the bandwagon, we have a detailed, five-part Quilting Basics Series and have included links to all the parts below. It's a great way to get started. This decorative throw for the foot of the bed is our way to show off the quilting features of Janome's sewing and quilting machines. We chose the Horizon Memory Craft 8900 QCP. A bed runner is lovely to look at, and it helps protect a fancier full-size quilt or bedspread. You can sit on a bed runner or even stretch out and place your feet on it. Ours finishes at approximately 92" x 34" and is sized for a king or queen mattress. The sample runner is shown on a king; there would simply be more drape down either side on a queen. We've done basic nine-patch blocks with each inner block made up of four pieced triangles. The clever mixing of colors creates a three-dimensional effect within each of the inner blocks as well as in the finished nine-patch itself. Stitching in the ditch was used to quilt the center blocks, while the inner and outer borders are done with free-motion stippling. 

Quilting is all about being exact from one step to the next, which is why having a good machine is so important. Janome machines, like the MC8900 QCP, have the features, power and precision to make quilting... or any other sewing, a dream. 

There's over 11" to the right of the needle, giving you plenty of room for large quilt tops. Plus, it can also work on a quilt frame with an optional remote thread cutter!

Janome's AcuFeed Flex™ fabric feeding system means you can go as thick as you want. The quiet power of the machine slices through multiple layers like butter; you can feel the layers of your project moving together under the needle with perfect precision. 

You get a multitude of well-thought-out options to make quilting easier, faster and frustration free; like super-fine needle position adjustment, a one-touch quarter inch setting, one-step needle plate conversion, and speeds up to 1000 stitches per minute.

If you'd like to test stitch the Janome Horizon Memory Craft 8900 QCP, or any other Janome model, visit a Janome Dealer in your area. 

Sewing Tools You Need

Fabric and Other Supplies

NOTE: We used four solid cottons from the Cotton Couture collection by Michael Miller Fabrics plus a Bella Solid by Moda in Porcelain. This Porcelain was used for the lightest color triangles, the quilt top's inner and outer borders and the quilt back.

  • ½ yard of Cotton Couture in Wedgewood for the binding
  • ⅝ yard of Cotton Couture in Azure for 27 triangles 
  • ⅝ yard of Cotton Couture in Black for 27 triangles
  • ⅝ yard of Cotton Couture in Denim for 27 triangles
  • 2½ yards of Bella Solids in Porcelain for 27 triangles, borders and backing
  • 2¾ yards of 36"+ wide lightweight, low loft batting; we used Fairfield Quilt Batting
  • All purpose thread to coordinate with fabric; we used pale blue
  • Machine quilting thread, 50 wt; we used natural
  • See-through ruler
  • Iron and ironing board
  • Scissors or rotary cutter and mat
  • Fabric pen or pencil
  • Straight pins
  • Seam gauge
  • Seam ripper
  • Large safety pins for quilt basting

Background notes

As we mentioned above, this article was designed to show-off the features and precision quilt stitching of the Janome Horizon Memory Craft 8900 QCP. The piecing and quilting themselves are not difficult, so we have simply summarized the main steps. If you are new to quilting, below are links to all the articles within our Quilt Basics Series as well as three articles that explain everything you need to know about binding the finished quilt. Review some or all of these prior to starting. 

Following the color diagram shown above will allow you to create the subtle three-dimensional effect.  

With a great machine, like the Janome MC8900 QCP and great tips and ideas from Sew4Home... you are ready to roll!

Quilting Tutorials

Binding Tutorials

Getting Started

  1. Cut TWO 9¼" x Width of Fabric (WOF) strips from the Azure, Black, Denim and Porcelain fabrics.
  2. Sub-cut each strip into seven 9¼" squares. 
  3. Cut each square corner to corner in one direction.
  4. Then, cut corner to corner in the opposite direction to create four triangles. You need 27 triangles of each color.
  5. From the Wedgewood, cut SIX 2" x WOF strips for the binding.
  6. Again from the Porcelain, cut EIGHT 5½" x WOF strips. 
  7. Finally, from the remaining Porcelain fabric, cut panels and piece them together to create an approximate 96" x 38" backing panel. It doesn't have to be exact, just larger than 92" x 34". You will trim it to exactly fit the top. 
  8. Cut the batting to approximately 96" x 38". As with the backing panel, it doesn't have to be exact; you will trim it to exactly fit the top.
    NOTE: You can piece your batting. Simply cut smaller pieces, then butt them together (do not overlap) and zig zag to secure the pieces together.

At Your Sewing Machine & Ironing Board

  1. Using the diagram above for color placement, arrange the triangles to form 27 squares. 
  2. Match pairs of triangles right sides together.
  3. Sew together, using a scant ¼" seam (just slightly narrower than ¼"). This scant seam can be easily set on the MC8900QCP.
  4. Match the two sewn halves of the square right sides together, nesting the seam allowances so one side is folded in one direction and the second side is folded in the opposite direction. 
  5. Sew with a scant ¼" seam. 
  6. Press the squares, taking care to keep the corners square. 
  7. Arrange the squares as shown in the diagram. 
  8. Remember to trim the "dog ears" that form at each corner when stitching triangles.
  9. Sew the squares together to form rows, then sew the rows together to form squares.
  10. Find two 5½" Porcelain strips. Sew a strip in between the three finished nine-patch blocks: block-strip-block-strip-block. Trim the strips flush with the blocks.
  11. Find another two 5½" Porcelain strips. Join them, using a bias seam, to make one continuous length. 
  12. Sew to this long length of border to one long side of the block/strip unit, using a ¼" seam. Trim both ends of the strip flush with the blocks. 
  13. Repeat with another set of strips for the opposite long side.
  14. Finally, find the remaining two 5½" Porcelain strips and sew one to each end to complete the quilt top. Again, trim the strips flush with the blocks.
  15. Layer the quilt backing, batting and quilt top to create a quilt sandwich. Baste the layers together.
  16. Stitch in the ditch around each triangle. We used the MC8900's AcuFeed Flex™ fabric feeding system to keep all our layers moving in unison. No slipping or sliding here!
  17. The 11"+ to the right of the needle on the MC8900 QCP gives you plenty of room to maneuver this large runner.
  18. Switch to an open toe free motion foot and stipple quilt within all the borders. 
  19. Switch back to your regular presser foot to stitch together the 2" strips of Wedgewood, using bias seams, to create one continuous length of bias binding. 
  20. Following one of our tutorials listed above, or your own favorite method, bind the quilt to finish. 


Project Design: Alicia Thommas      
Sample Creation and Instructional Outline: Michele Mishler



Comments (5)

lindsay001 said:
lindsay001's picture

I really like this quilt. How do you think it would look if I made it into a queen size instead of just a runner?  Any suggestions would be great. Thanks!

Liz Johnson.Editor.Sew4Home said:
Liz Johnson.Editor.Sew4Home's picture

@ lindsay001 - I'm sure it would make a lovely full size quilt. You would simply need to do the math in order to increase the number of "runner sections" needed to create your desired size. 

Jane Coombs said:
Jane Coombs's picture

What is the back story on "scant"? Is it the American terminology for a measurement that would have a quantity in metric quilting countries? Nothing in quilting scares me more. I am always afraid that my interpretation of scant is not accurate and I avoid patterns where the word is used. Is there a way to convert to the standard 1/4 inch allowance by making an adjustment at the cutting table? 

Lori O said:
Lori O's picture

My mom always told me that scant is one or two threads narrower than 1/4".  Do you have the 1/4" inch foot with the little black guard? For regular sewing snug your fabric right against the guard, for scant, keep your eye on that black guard and keept your fabric from touching it. As for adjusting on the cutting table, I don't think I would try it!