Did you know the modern ironing board was invented and patented by African American former slave, Sarah Boone in 1892? It's true. Although hers was not the first ironing board on the scene, it was completely unique in its narrow, contoured design, which allowed sleeves to be drawn up over the board. We'd like to think Ms. Boone would be pleased with our cheery Half Moon Modern ironing board cover. Just about all sewing projects require a fair amount of time spent staring at your ironing board. Why force yourself to look at those gawd-awful striped covers they sell at the local Target®... I swear those things must have been designed by someone with his eyes closed and both hands tied behind his back! You deserve a pretty cover. And, the bright colors and clean geometric lines of Moda's Half Moon Modern are absolutely perfect. The design is clean and energizing, yet the motif and colors we selected are subtle enough to provide a neutral background for all your ironing tasks.
Bear in mind our cover is meant to do just that ... cover up a worn-out ironing board pad. You can't put it right over the metal of the ironing board. You still need the padding and the heat resistant fabric of an actual pad.
Our thanks to Moda for sponsoring this Sewing Room Series and allowing Sew4Home to be one of the first to debut the great Half Moon Modern collection. Over the next few weeks, in addition to Monday's curtains and today's ironing board cover, we'll bring you: sewing machine and serger covers, an ironing board caddy, a task basket, pinboard, and a sewing and craft apron with pockets a'plenty. In addition, Moda has put together a stunning Half Moon Modern Great Giveaway and have sponsored a free downloadable Sewing Reference Guide.
These are the perfect projects to spruce up your own sewing room, and would make wonderful gifts for all the sewers and crafters on your holiday lists.
Visit Moda's Cutting Table Blog and their Facebook page today through December 6th to take advantage of " The 12 Moda Days of Christmas ." Each day, you can enter to win a great prize and at the end of the contest, be entered to win the big AccuQuilt GO! Baby die-cutter prize package. Check out their blog for all the details.
Half Moon Modern arrives in stores and online this month.
Sewing Tools You Need
- Any Sewing Machine (we recommend the Janome Hello Kitty 18750)
Fabric and Other Supplies
- 1⅔ yards of 44-45" wide fabric for the main body of the cover: we used Half Moon Modern by Moda Fabrics in Ovals Aqua
NOTE: You could probably get about with 1½ yards, but sometimes a fabric's print is not 100% straight; having a bit of extra fabric will allow you to shift the pattern around on the fabric to get the straightest cut.
- ¼ yard of 44-45" wide fabric for the end accent strip: we used Half Moon Modern by Moda Fabrics in Scissors Red
- 5 yards of ½" ribbon to gather bottom edge: we used a simple turquoise grosgrain
- All purpose thread to match fabrics
- See-through ruler
- Fabric pen or pencil
- Iron and ironing board
- Scissors or rotary cutter and mat
- Two large safety pins
- Seam gauge
- Straight pins
- First, measure the depth of the ironing board lip. Ours was 1-5/16" deep. Write down your measurement.
- Next, make a flat pattern of the TOP of your ironing board. The easiest way to do this is to remove your old pad so your are working with the plain metal top of the ironing board. Lay it upside down onto a thin piece of fabric or a lightweight paper. You want something you can see through so later you can easily fussy cut your final fabric. Trace around outer edge of ironing board.
- Cut out the shape along the traced line. Your pattern should be actual size and will look something like this:
- Now you need to figure out how much to add to your pattern in order to allow it to wrap around and under the ironing board, as well as to have enough for a casing for your ribbon.
- Start with the depth of your ironing board's lip (remember, ours was 1- 5/16" deep), add 1½ to make a casing, plus another 2½" to allow the cover to wrap under the board and give you a nice snug fit across the top. In our sample, these three figures add up to 5¼". We rounded up to 5½" just to be safe.
- You need to add this 5½" all the way around the outside edge of the pattern. To do this, use your see-through ruler or a seam gauge along with a fabric pen or pencil.
- We find it's best to work from the right side of the fabric to make sure you are keeping everything nice and straight. Place the pattern onto your main fabric. Adjust as needed so it lines up with any directional motifs on your fabric. This is particularly important if you used any kind of stripe, as we did with our Half Moon Modern Ovals Aqua .
- Measure and mark 5½" in small segments all around the patten piece, making little dots.
- When you're done, connect the dots to give yourself a cutting line to follow.
- Our accent stripe in the Half Moon Modern Scissors Red needed to be fussy cut so one full row of scissors would show along the ironing board's end. We measured the width of one row of scissors; it was 1½". We drew a straight line across the end of the paper pattern at 1½" from the paper's edge. Use this same technique to determine the width for your fabric's motif.
- Slide the bottom raw edge of the accent fabric into place, right side up on top of the main fabric (which is also still right side up). The raw edge of the fabric should be ½" beyond the drawn line on the paper pattern (that's for your seam allowance). Pin the paper pattern in place.
- Using the same method as you did for the main body of the cover, measure and mark 5½" around just the end of the pattern onto the accent fabric. Connect the dots to create the curve of the accent fabric. Cut along this drawn line.
- Lift up the paper pattern and place the edge of the see-through ruler exactly flush with the raw edge of the accent fabric's straight edge. Hold on to the ruler and slide out the accent fabric out from from underneath, leaving just the ruler on top of the main fabric. Measure and mark ½" beyond the ruler's edge to the left (toward what will be the square end of the ironing board cover). Draw a horizontal line. This is the cut line for the main fabric; we added ½" for the seam allowance of the horizontal seam that attaches the main fabric to the accent strip.
- Cut out the rest of the main fabric shape along the drawn line.
At Your Sewing Machine & Ironing Board
- Pin the accent panel to the main panel along the long straight end. Keep right sides together and match up your raw edges.
- Stitch together, using a ½" seam allowance. Press the seam allowance towards the accent stripe.
- Flip the accent piece into place so it is right side up.
- Thread your machine with thread to match the accent strip.
- Topstitch approximately ¼" from the seam within the accent strip.
NOTE: We like to increase stitch length (we went from 2.4 to 3.0) for topstitching. It looks a little nicer to have the longer stitch length, and since the topstitching isn't holding anything together (it just looks pretty and helps the cover stay flat), you don't need a super tight stitch length.
- Finish the entire perimeter of the ironing board cover with a serger or a finishing stitch on your sewing machine. We used a serger. For more on machine finishing, read our tutorial: Finishing Raw Seams: Part 1 - Sewing Machine Finishes.
- Turn the outside edge under ½" all the way around and press.
- Turn under another 1" all the way around and press again.
- As you fold around the side angles and the top rounded point, you'll need to ease the fabric to create a proper curve, which means your fabric casing will have tiny folds in it as it makes the turns. This is what it is supposed to do. Press well and pin well to keep these small folds in place.
- Leave a 2" opening un-pinned at the center of the square end - the flat end of the accent strip.
- Stitch all the way around, approximately ¼" from the inside folded edge to create the casing. Remember to leave that 2" opening at the center square end.
NOTE: As you can see in the photos above and below, we took the time to change out the thread color in our machine from one fabric to the next. We started with aqua thread in the top and bottom and stitched all around the main body of the cover, then we switched to red in the top and bottom to stitch around the accent stripe of the end, locking our stitch on either end of the 2" opening.
- Press well all around.
- Place a large safety pin on one end of your ribbon or cording. Feed this end through the casing.
NOTE: It's a good idea to put another large safety pin on the opposite end of the ribbon so you don't accidentally pull it through.
- Push the safety pin through the casing, gathering as you go.
- Once you've fed the ribbon/cording all the way through and out the opposite end, adjust the gathers to fit the cover on your ironing board. Pull the ends of the ribbon to draw the cover taut, and tie a simple knot or bow.
NOTE: We recommend leaving the large safety pins on the ends of the ribbon until you are all done with your adjustments and have tied your final knot or bow. It's a real pain to have the ribbon disappear into the casing and try to wiggle it out again.
- You can finish the ends of your ribbon with a tiny hem or simply cut the ends and apply a seam sealant.
Project Design: Alicia Thommas
Sample Creation: Debbie Guild
Other machines suitable for this project include the Singer 3323S Talent and the Baby Lock Elizabeth.