| Machine Sewing: Selecting the Right Needle for the Job |
|
|
| Editor: Liz Johnson | ||||
| Friday, 10 April 2009 04:00 | ||||
|
Needle SizesWhat the heck are those random numbers? The first thing you see on a needle package is the needle size. This will be shown as one number over another, such as: 70/10, 80/12 or 90/14. These numbers refer to the size of the needle. There are two numbers because one is the American numbering system and one the European. The American system uses 8 to 19; 8 is a fine, thin needle and 19 is a thick, heavy needle. European sizes range from 60 to 120, 60 is a fine, thin needle and 120 is a thick, heavy needle. Some companies list American first, some list European first. Here's the rule: the lower the number the finer the needle and the smaller the eyeFor example, if you are going to sew a sheer window curtain, you would want a fine needle such as 60/8. Using a 120/19 would leave giant holes in your fabric. On the other hand, if you were to try and sew through upholstery fabric with a 60/8 needle, it would bend or break. Using a 120/19 would give you strength to penetrate your heavy dec fabric and would have an eye large enough to carry the thicker thread you'll need to use. Test first on a scrap!When it comes right down to it, a needle can do as much damage to your fabric as a pair of scissors. Always test your needle with the actual thread you've chosen on a scrap of the actual fabric you'll be using for your project. Needle Types
For the majority of home decor projects, go for the Universal needle. It works well for most woven fabrics, knits and synthetics. Other home decor needle options:
As you become more advanced, you can investigate other unique needle options, like stretch, twin, triple and wing. Your needle is a very important part of your project. I think of it this way: a good needle in your sewing room is like a good knife in your kitchen.
Set as favorite
Share This
Email This
Comments (1)
![]()
mine
said:
|
|
... A couple of other pointers: You SHOULD change your needle for a fresh one after every major project to keep your machine running optimally. Also, I have used titanium needles and they work really well for me ( I guess I can be a little rough with the needles). |
|


















